EPOXY WATER BASE IMPREGNATING
- Epoxy filler based on water
- Good mechanical resistance
- Good chemical resistance
- Solvent - free, odourless
EPO FINISH AS W is a water base epoxy amide finish highly permeable to steam.
Ideal as anti-powder treatment of cls , as primer in water or solvent base epoxy cycle, as binder for quarz inerts in multilayer cycles.
Can be applied on cls wet floors or substrates with humidity
caratteristiche del prodotto
Use
This product is suitable for the anti – dust treatment of concrete floors or as a primer in solvent – less or water – based epoxy cycles, as a binder for inert quartz aggregates to perform multilayer cycles.
It can be applied on concrete that is not perfectly dry or on substrates with problems of the damp rising.
It can be applied on concrete that is not perfectly dry or on substrates with problems of the damp rising.
dilution
As first coat, dilute with 80 % of water; as second coat, dilute with 50 % of water
Estimated yield
12,5 m² / litre for a thickness of 40 micronsi
packages
Comp A 10 kg
Comp B 4 Kg
Colours
Transparent
Application
Brush, roller, airless, spray
If you use the brush, you have to use nylon or pure bristle brushes.
If you use the roller, you have to use medium – haired rollers.
For the application, use the method of crossing coats.
Airless:
Nozzle size: 0,46 mm (0,018 inch)
Air pressure: 150 bar
If you use the brush, you have to use nylon or pure bristle brushes.
If you use the roller, you have to use medium – haired rollers.
For the application, use the method of crossing coats.
Airless:
Nozzle size: 0,46 mm (0,018 inch)
Air pressure: 150 bar