Silicate-based filler
- Lista Elementi #1
- Lista Elementi #1
- Lista Elementi #1
- Lista Elementi #1
Wall coating based on modified potassium silicate, inorganic pigments and mineral fillers that react with the substrate, consolidating it. Featuring high breathability, it preserves the substrate from mold formation by virtue of the high alkalinity of the silicate
caratteristiche del prodotto
use
Can be applied to old and new plasters based on hydraulic binders as a filler and as a substrate uniforming agent. Can be used on old paints, both organic and mineral, as long as they are absorbent and cohesive
dilution
Ambient temperature: + 8 to 40°C
Support temperature: > than 5°C
Humidity: 0 to 75 %.
To prevent condensation, it is necessary for the substrate temperature to be at least 3°C above the dew point
Support temperature: > than 5°C
Humidity: 0 to 75 %.
To prevent condensation, it is necessary for the substrate temperature to be at least 3°C above the dew point
Estimated yield
1 mm= Kg. 1,500 kg/mq (G.F.).
1,2 mm= Kg. 2,500 kg/mq. (G.M.)
Packs
Comp A Kg. 25,000
Color
White – color chart
Application
Plastic trowel
Spread the product evenly on the substrate and even it out before spinning begins