Per maggiori informazioni, chiamare il numero o compilare il modulo di contatto.
How many times you happen to have to give a new coat of paint on a wall because you could not cover perfectly all the defects??
How many times have you had to do because your support was not perfectly white and uniform everywhere??
If your goal is to eliminate the most all the defects of a plaster without making the shaving of the wall itself with a final effect of absolute white, know that every coat of paint added is for you a waste of time, of effort and above all of money.
The main cause of this situation is a wrong professional advice or the choice of the materials that are not absolutely suitable for your goal.
Know and inquire is a way that can already avoid committing mistakes like this.
Would it be fantastic? Is that true?
In fact, these are the results relating to a tin of 14 liters of matt Super Paint, the very covering super paint which we created in 2010. In these 7 years, this paint gives us huge satisfactions.
The highest yield and the high covering power allow Super Paint to be among the most powerful white paints ( I don’t want to say the most powerful because I prefer that the customer says this) currently in circulation.
These features allow Super Paint to be used with amazing results, on difficult supports such as the plasterboard and the walls not perfectly shaved; the experts know very well these supports and, right from the start, they know that there will be a hard work to do.
The sure result is that with Super Paint
ALL THIS IS POSSIBLE THANKS TO ITS PARTICULAR FORMATION BASED ON SELECTED RAW MATERIALS AND WITH UNIQUE AND POWERFUL TECHNICAL FEATURES.
Now you allow me to be a bit boring, listing some points really important of this product
USE:
It is indicated for the treatment of the surfaces both in the interior and in the exterior. This product can be applied on new or old plasters, surfaces made of concrete, plaster, plasterboard, on old paints or on absorbing mineral supports.
YIELD: 14 – 18 m²/litre
PREPARATION OF SURFACES:
New surfaces: the new plasters or the patches must be cured, clean, dry and not pulverized. If there is mould, treat the surface with a suitable healing product. Remove by brushing or washing any efflorescence. Give a priming coat on the surfaces cleaned with acrylic fixative as IMPRIMITURA ACRILICA diluted 1 to 8 with water. For the exterior, it is recommended to use a solvent – based fixative such as PRIMER/P diluted to 20 – 25 % with DILUENTE SINTETICO.
Surfaces already painted: remove the parts of the paint that are peeling off; if they are paints based on tempera or lime, remove totally them by washing and brushing.
PRECAUTIONS:
If you want to download its data sheet, visit this page https://resinacolor.com/prodotti/prodotti-murali-di-finitura/
Thank you again for the time you have spent reading this article, and I hope you have found it useful.
If it is so, do not hesitate to share it with your friends or with people who need it.
These features allow Super Paint to be used with amazing results, on difficult supports such as the plasterboard and the walls not perfectly shaved; the experts know very well these supports and, right from the start, they know that there will be a hard work to do.
The sure result is that with Super Paint
ALL THIS IS POSSIBLE THANKS TO ITS PARTICULAR FORMATION BASED ON SELECTED RAW MATERIALS AND WITH UNIQUE AND POWERFUL TECHNICAL FEATURES.
Now you allow me to be a bit boring, listing some points really important of this product
USE:
It is indicated for the treatment of the surfaces both in the interior and in the exterior. This product can be applied on new or old plasters, surfaces made of concrete, plaster, plasterboard, on old paints or on absorbing mineral supports.
YIELD: 14 – 18 m²/litre
PREPARATION OF SURFACES:
New surfaces: the new plasters or the patches must be cured, clean, dry and not pulverized. If there is mould, treat the surface with a suitable healing product. Remove by brushing or washing any efflorescence. Give a priming coat on the surfaces cleaned with acrylic fixative as IMPRIMITURA ACRILICA diluted 1 to 8 with water. For the exterior, it is recommended to use a solvent – based fixative such as PRIMER/P diluted to 20 – 25 % with DILUENTE SINTETICO.
Surfaces already painted: remove the parts of the paint that are peeling off; if they are paints based on tempera or lime, remove totally them by washing and brushing.
PRECAUTIONS:
If you want to download its data sheet, visit this page https://resinacolor.com/prodotti/prodotti-murali-di-finitura/
Thank you again for the time you have spent reading this article, and I hope you have found it useful.
If it is so, do not hesitate to share it with your friends or with people who need it.
Per maggiori informazioni, chiamare il numero o compilare il modulo di contatto.
Opportunità:
Agenti Rappresentanti Plurimandatari – Settore Ferramenta E Colorifici
Ferramenta E Colorifici In Cerca Di Nuovi Partner
Distributori O Grossisti – Settore Colorifici Ed Edilizia
Imprese Edili In Cerca Di Qualità
Decoratori Che Valorizzano La Qualità
